Fire & Smoke Stop Compound

ProForm® Quick Set™ Fire and Smoke Stop 90 Setting Compound

Designed to provide protection in fire-stopping penetrations through fire rated partitions or assemblies in both new and retrofit construction.

Resources

3-Part Guide Specs

Literature

SDS

Submittals

Designed to provide protection in fire-stopping penetrations

Seals out smoke, toxic gas and water and provides a seal to stop sound and dust infiltration
  • Blocks fire and smoke - dries red for easy identification.
  • Saves money - more economical and less waste than caulking tube products.
  • Reduces waste - mix only what you need for the job.

ProForm® Quick Set™ Fire and Smoke Stop 90 Setting Compound is a setting/hardening type compound designed to provide protection in fire-stopping penetrations through fire-rated partitions or assemblies in both new and retrofit construction.

Fire-Shield 90 Compound seals out smoke, toxic gas, and water and provides a seal to stop sound and dust infiltration. It is tinted a reddish/pink color to distinguish it from other joint treatment products.

Advantages

  • Comes in powder form so that only the amount of material needed can be mixed, with less waste.
  • Two components to system, FS 90 compound, and fiberglass insulation backing.
  • Tinted reddish/pink color for easy jobsite identification.
  • Lower in-place cost than many other type products.

Availability

  • Nationwide

Specifications

Products that suit any project criteria

Product Details

Applications:

Same-Day Finishing

Packaging:

Bag

Coverage:

850 cu in

Bag Volume:

25 lb

Related Resources

Product details and technical documentation

Fire & Sound Selector

HPD

Frequently Asked Questions

Ready to answer your product and installation questions

Why is the product lumpy after mixing?

Possible reasons for this to occur are:

- Water was added to the setting compound, rather than the compound being added to the water.

- Setting compound was not allowed to soak (for approximately one minute) after the initial mix before remixing was initiated.

Why is the product setting much faster than the advertised range?

Possible reasons for this to occur are:

- Dirty mixing water and/or application tools.

- Excessive mixing of the compound.

- Foreign material (accidentally or deliberately) added to the mixture.

- Mixing water too hot.

Why is the product setting much slower than the advertised range?

Possible reasons for this to occur are:

- Too much water was used.

- Impure water source (dissolved organics in the water generally retard the set time).

- Foreign material (accidentally or deliberately) added to the mixture.

- Water too cold.

- The product was remixed after initial stiffening began.

Why does the product display weak strength?

Possible reasons for this to occur are:

- Too much water was used.

- Foreign material (accidentally or deliberately) added to the mixture.

What is the difference between “Working Time” and “Setting Time”?

Working time refers to the period during which the ProForm setting compound is usable for application. At the end of this time, the material begins to stiffen and can no longer be spread easily. Working time should correspond to the required time for the actual application.


Setting time refers to the time after which the applied ProForm setting compound will become adequately hardened so that another layer can be applied. For manufactured or modular builders, the setting time should match your timetable for moving a floor along the line.

4 Design center

Design & Resources

Review ProForm details and technical information in the Design & Resource Center.

Design & Resource Center
Expert Connection

Expert Connection

Contact ProForm representatives who can help troubleshoot your project challenges.

Get Started

Need Technical Information?

Call 1-800-NATIONAL®

National Gypsum Company is the exclusive service provider for products manufactured by ProForm Finishing Products, LLC.