Ready Mix

ProForm® Lite Joint Compound

Designed for use in finishing gypsum board joints, spotting fasteners and finishing cornerbead.

Resources

3-Part Guide Specs

Literature

SDS

Submittals

Lightweight joint compound

30% lighter than conventional ready mix
  • Approximately 30% lighter than conventional ProForm® Joint Compound.
  • Up to 33% less shrinkage than conventional joint compound.
  • Mold Resistant.

ProForm® Lite Joint Compound is a vinyl base ready mix lightweight joint compound. Approximately 30% lighter than conventional ready mix, Lite Joint Compound pulls and sands easier and reduces shrinkage by up to 33%.

Lite Joint Compound is designed for use in finishing gypsum board joints, spotting fasteners and finishing cornerbead.

Advantages

  • Lightweight. Approximately 30% lighter than conventional ProForm Joint Compound.
  • Reduced shrinkage. Up to 33% less shrinkage than conventional joint compound.
  • Superior finish. Provides a finish with less pocking and pin holing.
  • Easier pull. Spreads easier for quick application.
  • Finishes metal beads with two coats.
  • Excellent sanding characteristics.
  • Ready to use right from container.
  • Mold resistant.
  • Low VOC content - less than 2 grams/liter.

Availability

  • Southwest Area Only

ProForm® Lite Joint Compound has achieved UL GREENGUARD Certification.

Video: ProForm Lite Joint Compound

video-image

Specifications

Products that suit any project criteria

Product Details

Applications:

Finishing

Packaging:

Carton

Coverage:

123-140 lbs/9 gal per 1,000 sq ft

Carton Volume:

3.5 gal

Related Resources

Product details and technical documentation

EPD

HPD

Product MasterSpec

UL GREENGUARD Certification

Frequently Asked Questions

Ready to answer your product and installation questions

Do you have mold resistant ready mix?

No material can be considered “mold-proof,” nor is it certain that any material will resist mold or mildew indefinitely. However, when used in conjunction with good design, handling, and construction practices, ProForm ready mix can provide increased mold resistance versus standard ready-mixed compounds. As with any building material, avoiding water exposure during handling, storage and installation and after installation is complete is the best way to avoid the formation of mold or mildew.

How much does a pail or carton of ready mix cover?

A good rule of thumb is to use nine gallons of ready mix for every 1000 sq ft of wallboard.

How should ready mix be stacked?

Ready mix pails or cartons should not be stacked more than two pallets high.

What is the shelf life of ready mix?

Nine months in good storage conditions. To prevent spoilage and freezing, maintain temperature at a minimum 50˚F (10˚C) and protect container from exposure to extreme heat and sunlight.

What happens if my ready mix freezes?

While not ideal, ProForm joint compound can go through up to 3 freeze-thaw cycles. Allow material to thaw at room temperature for at least 24 hours. When thawed, turn the container upside-down for at least 15 minutes. Turn pail right-side up, remove the lid and immediately remix with an electric drill. Ready mix should be lump-free and ready to use within 1 minute. Discard ready mix that does not remix to a lump-free consistency.

4 Design center

Design & Resources

Review ProForm details and technical information in the Design & Resource Center.

Design & Resource Center
Expert Connection

Expert Connection

Contact ProForm representatives who can help troubleshoot your project challenges.

Get Started

Need Technical Information?

Call 1-800-NATIONAL®

National Gypsum Company is the exclusive service provider for products manufactured by ProForm Finishing Products, LLC.